R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

139
poe legacy enable
Use poe legacy enable to enable a PSE to detect nonstandard PDs.
Use undo poe legacy enable to disable a PSE from detecting nonstandard PDs.
Syntax
poe legacy enable pse pse-id
undo poe legacy enable pse pse-id
Default
Nonstandard PD detection is disabled.
Views
System view
Predefined user roles
network-admin
Parameters
pse pse-id: Specifies a PSE by its ID.
Examples
# Enable PSE 7 to detect nonstandard PDs.
<Sysname> system-view
[Sysname] poe legacy enable pse 7
Related commands
display poe pse
poe max-power
Use poe max-power to configure the maximum power for a PI.
Use undo poe max-power to restore the default.
Syntax
poe max-power max-power
undo poe max-power
Default
The maximum PI power is 15.4 W for the SIC-4FSWP, SIC 4GSWP, and DSIC 9FSWP. The maximum PI
power is 16.6 W for the HMIM 24GSW-POE.
Views
PI view
PoE profile view
Predefined user roles
network-admin