R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

16
Parameters
text: Specifies a case-sensitive string of 1 to 200 characters.
Examples
# Configure the description for an NQA operation as icmp-probe.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
# In ICMP template view, configure the description for an NQA operation as icmp-probe.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] description icmp-probe
destination ip
Use destination ip to configure the destination IP address for the operation.
Use undo destination ip to remove the destination IP address.
Syntax
destination ip ip-address
undo destination ip
Default
No destination IP address is configured for the operation.
Views
DHCP/DLSw/DNS/SNMP/TCP/voice operation view
ICMP/UDP echo operation view
Path/UDP jitter operation view
DNS/ICMP/TCP template view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address for the operation.
Examples
# Configure the destination IP address for the ICMP echo operation as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] destination ip 10.1.1.1
# In ICMP template view, configure the destination IP address for the ICMP echo operation as 10.1.1.1.
<Sysname> system-view
[Sysname] nqa template icmp icmptplt
[Sysname-nqatplt-icmp-icmptplt] destination ip 10.1.1.1