R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

24
Sum/Square-Sum positive jitter: 0/0
Negative jitter number: 0
Min/Max/Average negative jitter: 0/0/0
Sum/Square-Sum negative jitter: 0/0
Hop IP 192.168.50.209
Basic Results:
Send operation times: 10
Receive response times: 10
Min/Max/Average round trip time: 1/1/1
Square-Sum of round trip time: 10
Extended Results:
Packet loss ratio: 0%
Failures due to timeout: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packets out of sequence: 0
Packets arrived late: 0
Path-Jitter Results:
Jitter number: 9
Min/Max/Average jitter: 0/0/0
Positive jitter number: 0
Min/Max/Average positive jitter: 0/0/0
Sum/Square-Sum positive jitter: 0/0
Negative jitter number: 0
Min/Max/Average negative jitter: 0/0/0
Sum/Square-Sum negative jitter: 0/0
Table 9 Command output
Field Descri
p
tion
Send operation times Number of operations.
Receive response times Number of response packets received.
Min/Max/Average round trip time Minimum/maximum/average round-trip time in milliseconds.
Square-Sum of round trip time Square sum of round-trip time.
Last succeeded probe time
Time when the last successful probe was completed. If no probes are
successful in an operation, the field displays 0.
This field is not available for UDP jitter, path jitter, and voice
operations.
Last packet received time
Time when the last response packet was received. If no response
packets in a probe were received, the field displays 0.
This field is available only for UDP jitter and voice operations.
Packet loss ratio Average packet loss ratio.
Failures due to timeout Number of timeout occurrences in an operation.
Failures due to disconnect Number of disconnections by the peer.
Failures due to no connection Number of failures to connect with the peer.