R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

345
ipv6 netstream export v9-template refresh-rate packet
Use ipv6 netstream export v9-template refresh-rate packet to configure the refresh frequency (in packets)
for IPv6 NetStream version 9 templates. The templates are sent after the specified number of packets are
sent.
Use undo ipv6 netstream export v9-template refresh-rate packet to restore the default.
Syntax
ipv6 netstream export v9-template refresh-rate packet packets
undo ipv6 netstream export v9-template refresh-rate packet
Default
Version 9 templates are sent every 20 packets.
Views
System view
Predefined user roles
network-admin
Parameters
packets: Specifies the number of packets that are sent before a version 9 template is sent to NetStream
servers for an update. The value range is 1 to 600.
Usage guidelines
Version 9 is template-based and supports user-defined formats. An IPv6 NetStream-enabled device must
periodically resend the updated template to NetStream servers. The server cannot associate the statistics
with their proper fields when the following conditions exist:
• The version 9 template is changed on the IPv6 NetStream-enabled device.
• The version 9 template is not updated on NetStream servers.
To avoid this situation, configure the refresh frequency for version 9 templates so that NetStream servers
can refresh them.
The refresh frequency and the refresh interval can both be configured, and the template is resent when
either of the conditions is reached.
Examples
# Configure the device to wait until 100 packets are sent before resending an IPv6 NetStream version 9
template to NetStream servers.
<Sysname> system-view
[Sysname] ipv6 netstream export v9-template refresh-rate packet 100
Related commands
ipv6 netstream export v9-template refresh-rate time
ipv6 netstream export v9-template refresh-rate time
Use ipv6 netstream export v9-template refresh-rate time to configure the refresh interval for IPv6
NetStream version 9 templates. Then, the templates are sent after the specified time period.
Use undo ipv6 netstream export v9-template refresh-rate time to restore the default.