R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

356
Syntax
sflow counter collector collector-id
undo sflow counter collector
Default
No sFlow collector is specified for counter sampling.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10.
Examples
# Specify sFlow collector 2 on GigabitEthernet 2/1/1 for counter sampling.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] sflow counter collector 2
sflow flow collector
Use sflow flow collector to specify an sFlow collector for flow sampling.
Use undo sflow flow collector to restore the default.
Syntax
sflow flow collector collector-id
undo sflow flow collector
Default
No sFlow collector is specified for flow sampling.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view
Predefined user roles
network-admin
Parameters
collector-id: Specifies an sFlow collector by its ID in the range of 1 to 10.
Examples
# Specify sFlow collector 2 on GigabitEthernet 2/1/1 for flow sampling.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname-GigabitEthernet2/1/1] sflow flow collector 2