R0106-HP MSR Router Series Network Management and Monitoring Command Reference(V7)

372
Parameters
buffersize: Specifies the maximum number of logs that can be stored in the log buffer. The value range
is 0 to 1024, and the default is 512.
Examples
# Set the maximum number of logs that can be stored in a log buffer to 50.
<Sysname> system-view
[Sysname] info-center logbuffer size 50
# Restore the default maximum log buffer size.
<Sysname> system-view
[Sysname] undo info-center logbuffer size
Related commands
• display logbuffer
• info-center enable
info-center logfile enable
Use info-center logfile enable to enable the log file feature.
Use undo info-center logfile enable to disable the log file feature.
Syntax
info-center logfile enable
undo info-center logfile enable
Default
The log file feature is enabled.
Views
System view
Predefined user roles
network-admin
Examples
# Enable the output of logs to a log file.
<Sysname> system-view
[Sysname] info-center logfile enable
info-center logfile frequency
Use info-center logfile frequency to configure the interval for saving logs to a log file.
Use undo info-center logfile frequency to restore the default saving interval.
Syntax
info-center logfile frequency freq-sec
undo info-center logfile frequency