R0106-HP MSR Router Series Security Command Reference(V7)

87
You can remove an authentication server only when it is not used for user authentication. Removing an
authentication server affects only authentication processes that occur after the remove operation.
For security purposes, all shared keys, including shared keys configured in plain text, are saved in
ciphertext.
Examples
# Specify the primary authentication server with IP address 10.163.155.13, TCP port number 49, and
plaintext shared key 123456TESTauth&! for HWTACACS scheme hwt1.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] primary authentication 10.163.155.13 49 key simple
123456TESTauth&!
Related commands
• display hwtacacs scheme
• key (HWTACACS scheme view)
• secondary authentication (HWTACACS scheme view)
• vpn-instance (HWTACACS scheme view)
primary authorization
Use primary authorization to specify the primary HWTACACS authorization server.
Use undo primary authorization to remove the configuration.
Syntax
primary authorization { ipv4-address | ipv6 ipv6-address } [ port-number | key { cipher | simple } string
| single-connection | vpn-instance vpn-instance-name ] *
undo primary authorization
Default
No primary HWTACACS authorization server is specified.
Views
HWTACACS scheme view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IPv4 address of the primary HWTACACS authorization server.
ipv6 ipv6-address: Specifies the IPv6 address of the primary HWTACACS authorization server.
port-number: Specifies the service port number of the primary HWTACACS authorization server. The
value range for the TCP port number is 1 to 65535, and the default setting is 49.
key { cipher | simple } string: Sets the shared key for secure communication with the primary
HWTACACS authorization server.
• cipher string: Sets a ciphertext shared key. The string argument is case sensitive.
{ In non-FIPS mode, the key is a string of 1 to 373 characters.
{ In FIPS mode, the key is a string of 15 to 373 characters.