R0106-HP MSR Router Series Security Command Reference(V7)

131
Default
No SmartOn switch ID is configured.
Views
System view
Predefined user roles
network-admin
Parameters
switch-string: Specifies the SmartOn switch ID, a case-sensitive string of 1 to 30 characters.
Usage guidelines
The device checks the SmartOn switch ID in each received EAP-Response/Notification packet. If the
switch ID is not the same as the switch ID on the device, the device stops the 802.1X authentication
process for the client that sends this packet.
Examples
# Configure the SmartOn switch ID as abc.
<Sysname> system-view
[Sysname] dot1x smarton switchid abc
Related commands
• display dot1x
• dot1x smarton
• dot1x smarton password
dot1x smarton timer supp-timeout
Use dot1x smarton timer supp-timeout to set the SmartOn client timeout timer.
Use undo dot1x smarton timer supp-timeout to restore the default.
Syntax
dot1x smarton timer supp-timeout time-value
undo dot1x smarton timer supp-timeout
Default
The SmartOn client timeout timer is 30 seconds.
Views
System view
Predefined user roles
network-admin
Parameters
time-value: Sets the SmartOn client timeout timer. The value range is 10 to 120, in seconds.
Usage guidelines
The SmartOn client timeout timer starts when the device sends an EAP-Request/Notification packet to the
client. If the device does not receive any EAP-Response/Notification packets from the client within the