R0106-HP MSR Router Series Security Command Reference(V7)

167
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6: Specifies an authentication domain for IPv6 portal users. Do not specify this keyword for IPv4 portal
users.
domain-name: Specifies an ISP authentication domain by its name, a case-insensitive string of 1 to 255
characters.
Usage guidelines
You can specify both an IPv4 portal authentication domain and an IPv6 portal authentication domain on
the interface.
Do not specify the ipv6 keyword for IPv4 portal users.
Examples
# Configure the authentication domain for IPv4 portal users as my-domain on interface GigabitEthernet
2/1/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/1/1
[Sysname–GigabitEthernet2/1/1] portal domain my-domain
Related commands
display portal interface
portal enable
Use portal [ ipv6 ] enable to enable portal authentication on an interface.
Use undo portal [ ipv6 ] enable to disable portal authentication on the interface.
Syntax
portal enable method { direct | layer3 | redhcp }
portal ipv6 enable method { direct | layer3 }
undo portal [ ipv6 ] enable
Default
Portal authentication is disabled on the interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
ipv6: Enables IPv6 portal authentication. Do not specify this keyword for IPv4 portal authentication.
method: Specifies an authentication mode: