R0106-HP MSR Router Series Security Command Reference(V7)

178
Default
No portal authentication server is configured on the device.
Views
System view
Predefined user roles
network-admin
Parameters
server-name: Specifies a portal authentication server by its name, a case-sensitive string of 1 to 32
characters.
Usage guidelines
In portal authentication server view, you can configure the following parameters and functions for the
portal authentication server:
• IP address of the server.
• MPLS L3VPN where the portal authentication server resides.
• Preshared key for communication between the access device and the server.
• Destination UDP port number used by the device to send unsolicited portal packets to the portal
authentication server.
• Server detection function.
You can configure multiple portal authentication servers for an access device.
Examples
# Create portal authentication server pts and enter its view.
<Sysname> system-view
[Sysname] portal server pts
[Sysname-portal-server-pts]
Related commands
display portal server
portal user-detect
Use portal user-detect to enable online detection of IPv4 portal users on an interface.
Use undo portal user-detect to restore the default.
Syntax
portal user-detect type { arp | icmp } [ retry retries] [ interval interval ] [ idle time ]
undo portal user-detect
Default
Online detection of IPv4 portal users is disabled on the interface.
Views
Interface view
Predefined user roles
network-admin