R0106-HP MSR Router Series Security Command Reference(V7)

337
reverse-route preference
Use reverse-route preference to change the preference of the static routes created by IPsec RRI.
Use undo reverse-route preference to restore the default.
Syntax
reverse-route preference number
undo reverse-route preference
Default
The preference for the static routes created by IPsec RRI is 60.
Views
IPsec policy view, IPsec policy template view
Predefined user roles
network-admin
Parameters
number: Sets a preference value. The value range is 1 to 255. A smaller value represents a higher
preference.
Usage guidelines
When you change this preference in an IPsec policy, the device deletes all IPsec SAs created according
to this IPsec policy, and the associated static routes.
Examples
# Change the preference to 100 for static routes created by IPsec RRI.
<Sysname> system-view
[Sysname] ipsec policy 1 1 isakmp
[Sysname-ipsec-policy-isakmp-1-1] reverse-route preference 100
Related commands
• ipsec policy
• ipsec policy-template
reverse-route tag
Use reverse-route tag to set a route tag for the static routes created by IPsec RRI. This tag helps in
implementing flexible route control through routing policies.
Use undo reverse-route tag to restore the default.
Syntax
reverse-route tag tag-value
undo reverse-route tag
Default
The tag value is 0 for the static routes created by IPsec RRI.
Views
IPsec policy view, IPsec policy template view