R0106-HP MSR Router Series Security Command Reference(V7)

415
Related commands
display ssh client source
ssh2
Use ssh2 to establish a connection to an IPv4 Stelnet server.
Syntax
Low encryption:
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher des | prefer-ctos-hmac { md5 | md5-96 | sha1 | sha1-96 } |
prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } | prefer-stoc-cipher des |
prefer-stoc-hmac { md5 | md5-96 | sha1 | sha1-96 } ] * [ dscp dscp-value | publickey keyname |
source { interface interface-type interface-number | ip ip-address } ] *
High encryption in non-FIPS mode:
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key { dsa | rsa } |
prefer-compress zlib | prefer-ctos-cipher { 3des | aes128 | aes2
56 | des } | prefer-ctos-hmac { md5 |
md5-96 | sha1 | sha1-96 } | prefer-kex { dh-group-exchange | dh-group1 | dh-group14 } |
prefer-stoc-cipher { 3des | aes128 | aes256 | des } | prefer-stoc-hmac { md5 | md5-96 | sha1 |
sha1-96 } ] * [ dscp dscp-value | publickey keyname | source { interface interface-type interface-number
| ip ip-address } ] *
In FIPS mode:
ssh2 server [ port-number ] [ vpn-instance vpn-instance-name ] [ identity-key rsa | prefer-compress zlib
| prefer-ctos-cipher { aes128 | aes256 } | prefer-ctos-hmac { sha1 | sha1-96 } | prefer-kex dh-group14
| prefer-stoc-cipher { aes128 | aes
256 } | prefer-stoc-hmac { sha1 | sha1-96 } ] * [ publickey keyname
| source { interface interface-type interface-number | ip ip-address } ] *
Views
User view
Predefined user roles
network-admin
Parameters
server: Specifies a server by its IPv4 address or host name, a case-insensitive string of 1 to 253
characters.
port-number: Specifies the port number of the server, in the range 1 to 65535. The default is 22.
vpn-instance vpn-instance-name: Specifies the MPLS L3VPN instance to which the server belongs, where
vpn-instance-name is a case-sensitive string of 1 to 31 characters.
identity-key: Specifies a public key algorithm for the client, either dsa or rsa. The default is dsa. If the
server uses publickey authentication, this keyword must be specified.
• dsa: Specifies the public key algorithm dsa.
• rsa: Specifies the public key algorithm rsa.
prefer-compress: Specifies the preferred compression algorithm between the server and the client. By
default, compression is not supported.
zlib: Specifies the compression algorithm zlib.