R0106-HP MSR Router Series Security Command Reference(V7)

430
Default
No SSL client policy exists on the device.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name: Specifies an SSL client policy by its name, a case-insensitive string of 1 to 31 characters.
Usage guidelines
This command creates an SSL client policy for which you can configure SSL parameters that the client
uses to establish a connection to the server. The parameters include a PKI domain and a preferred cipher
suite. An SSL client policy takes effect only after it is associated with an application such as the Dynamic
Domain Name System (DDNS).
Examples
# Create SSL client policy policy1 and enter SSL client policy view.
<Sysname> system-view
[Sysname] ssl client-policy policy1
[Sysname-ssl-client-policy-policy1]
Related commands
display ssl client-policy
version
Use version to specify an SSL version for an SSL client policy.
Use undo version to restore the default.
Syntax
In non-FIPS mode:
version { ssl3.0 | tls1.0 }
undo version
In FIPS mode:
version tls1.0
undo version
Default
The SSL protocol version for an SSL client policy is TLS 1.0.
Views
SSL client policy view
Predefined user roles
network-admin