R0106-HP MSR Router Series Security Command Reference(V7)

433
aspf policy
Use aspf policy to create an ASPF policy and enter its view.
Use undo aspf policy to remove an ASPF policy.
Syntax
aspf policy aspf-policy-number
undo aspf policy aspf-policy-number
Default
No ASPF policy exists.
Views
System view
Predefined user roles
network-admin
Parameters
aspf-policy-number: Assigns a number to the ASPF policy. The value range for this argument is 1 to 256.
Examples
# Create ASPF policy 1 and enter ASPF policy view.
<Sysname> system-view
[Sysname] aspf policy 1
[Sysname-aspf-policy-1]
Related commands
• display aspf all
• display aspf policy
detect
Use detect to configure ASPF inspection for an application layer protocol or a transport layer protocol.
Use undo detect to restore the default.
Syntax
detect { dccp | ftp | gtp | h323 | icmp | icmpv6 | ils | mgcp | nbt | pptp | rawip | rsh | rtsp | sccp
| sctp | sip |sqlnet | tcp | tftp | udp | udp-lite | xdmcp }
undo detect { dccp | ftp | gtp | h323 | icmp | icmpv6 | ils | mgcp | nbt | pptp | rawip | rsh | rtsp
| sccp | sctp | sip |sqlnet | tcp | tftp | udp | udp-lite | xdmcp }
Default
ASPF does not inspect any application layer protocol or transport layer protocol.
Views
ASPF policy view
Predefined user roles
network-admin