R0106-HP MSR Router Series Security Command Reference(V7)

31
If the user goes offline due to connection failure or malfunction, the user online duration sent to the server
is not the same as the actual online duration.
• If the session-time include-idle-time command is configured, the device adds the idle cut period or
user online detection interval to the actual online duration. The user online detection period is
supported only by portal authentication. The online duration sent to the server is longer than the
actual online duration of the user.
• If the undo session-time include-idle-time command is configured, the device excludes the idle cut
period or user online detection interval from the actual online duration. The online duration sent to
the server is shorter than the actual online duration of the user.
Examples
# Configure the device to include the idle cut period or user online detection interval in the online
duration sent to the server for the users in ISP domain test.
<Sysname> system-view
[Sysname] domain test
[Sysname-isp-test] session-time include-idle-time
Related commands
display domain
state (ISP domain view)
Use state to set the status of an ISP domain.
Use undo state to restore the default.
Syntax
state { active | block }
undo state
Default
An ISP domain is in active state.
Views
ISP domain view
Predefined user roles
network-admin
Parameters
active: Places the ISP domain in active state to allow the users in the ISP domain to request network
services.
block: Places the ISP domain in blocked state to prevent users in the ISP domain from requesting network
services.
Usage guidelines
By blocking an ISP domain, you disable offline users of the domain from requesting network services. The
online users are not affected.
Examples
# Place the ISP domain test in blocked state.
<Sysname> system-view