R0106-HP MSR Router Series Security Command Reference(V7)

38
Syntax
display user-group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a user group by its name, a case-insensitive string of 1 to 32 characters. If you do
not specify a user group, this command displays the configuration of all user groups.
Examples
# Display the configuration of all user groups.
<Sysname> display user-group
Total 2 user groups matched.
The contents of user group system:
Authorization Attributes:
Work Directory: flash:
The contents of user group jj:
Authorization Attributes:
Idle TimeOut: 2 (min)
Callback Number: 2:2
Work Directory: flash:/
ACL Number: 2000
VLAN ID: 2
Password control configurations:
Password aging: Enabled (2 days)
Table 3 Command output
Field Descri
p
tion
Idle TimeOut Idle timeout period, in minutes.
Callback-number Authorized PPP callback number.
Work Directory Directory that FTP, SFTP, or SCP users in the group can access.
ACL Number Authorization ACL.
VLAN ID Authorized VLAN.
Password control configurations Password control attributes that are configured for the user group.
Password aging
This field appears only when password aging is enabled. The aging time
is displayed in parentheses.
Password length
This field appears only when password length control is enabled. The
minimum password length is displayed in parentheses.