R0106-HP MSR Router Series Security Command Reference(V7)

513
IP source guard commands
In this chapter, "MSR2000" refers to MSR2003. "MSR3000" collectively refers to MSR3012, MSR3024,
MSR3044, MSR3064. "MSR4000" collectively refers to MSR4060 and MSR4080.
The IP source guard commands are supported on the following hardware:
MSR routers installed with the Layer 2 switching module HMIM-24GSW/24GSWP or HMIM-8GSW.
display ip source binding
Use display ip source binding to display IPv4 source guard binding entries.
Syntax
MSR2000/MSR3000:
display ip source binding [ static | [ vpn-instance vpn-instance-name ] [ dhcp-snooping | dot1x ] ]
[ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ] [ interface interface-type
interface-number ]
MSR4000:
display ip source binding [ static | [ vpn-instance vpn-instance-name ] [ dhcp-snooping | dot1x ] ]
[ ip-address ip-address ] [ mac-address mac-address ] [ vlan vlan-id ] [ interface interface-type
interface-number ] [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
static: Displays static IPv4 source guard binding entries.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name. The VPN instance
name is a case-sensitive string of 1 to 31 characters. To display dynamic IPv4 source guard binding
entries for the public network, do not specify a VPN instance.
dhcp-snooping: Displays dynamic IPv4 source guard binding entries based on DHCP snooping.
dot1x: Displays dynamic IPv4 source guard binding entries based on 802.1X.
ip-address ip-address: Displays IP source guard binding entries for an IPv4 address.
mac-address mac-address: Displays IP source guard binding entries for a MAC address. The MAC
address must be specified in H-H-H format.
vlan vlan-id: Displays IPv4 source guard binding entries for a VLAN. The vlan-id argument specifies the
VLAN ID in the range of 1 to 4094.
interface interface-type interface-number: Displays IPv4 source guard binding entries on an interface.
The interface-type interface-number argument specifies the interface type and the interface number.