R0106-HP MSR Router Series Security Command Reference(V7)

45
RADIUS commands
accounting-on enable
Use accounting-on enable to configure the accounting-on feature.
Use undo accounting-on enable to restore the default.
Syntax
accounting-on enable [ interval seconds | send send-times ] *
undo accounting-on enable
Default
The accounting-on feature is disabled.
Views
RADIUS scheme view
Predefined user roles
network-admin
Parameters
interval seconds: Specifies the time interval for retransmitting an accounting-on packet in seconds. The
value range for the seconds argument is 1 to 15, and the default setting is 3 seconds.
send send-times: Specifies the maximum number of accounting-on packet transmission attempts. The
value range for the send-times argument is 1 to 255, and the default setting is 50.
Usage guidelines
The accounting-on feature enables the device to automatically send an accounting-on packet to the
RADIUS server after a reboot. Upon receiving the accounting-on packet, the RADIUS server logs out all
online users so they can log in again through the device.
Execute the save command to make sure the accounting-on enable command takes effect at the next
reboot. For information about the save command, see Fundamentals Command Reference.
Parameters set with the accounting-on enable command take effect immediately.
Examples
# Enable the accounting-on feature for RADIUS scheme radius1, and set the retransmission interval to 5
seconds and the transmission attempts to 15.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] accounting-on enable interval 5 send 15
Related commands
display radius scheme
attribute 15 check-mode
Use attribute 15 check-mode to configure the attribute 15 check mode for SSH, FTP, and terminal users.
Use undo attribute 15 check-mode to restore the default.