R0106-HP MSR Router Series Security Command Reference(V7)

583
display attack-defense scan attacker ip
Use display attack-defense scan attacker ip to display information about IPv4 scanning attacker.
Syntax
MSR2000/MSR3000:
display attack-defense scan attacker ip [ interface interface-type interface-number | local ] [ count ]
MSR4000:
display attack-defense scan attacker ip [ interface interface-type interface-number | local ] [ slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify a
global interface, such as a VLAN interface or tunnel interface. (MSR4000.)
count: Displays the number of matching IPv4 scanning attackers.
Usage guidelines
If no parameter is specified, this command displays information about all IPv4 scanning attackers.
Examples
# (MSR2000/MSR3000.) Display information about all IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip
IP address VPN instance DS-Lite tunnel peer Detected on Duration(min)
192.168.31.2 -- -- GE2/1/2 1284
2.2.2.3 -- -- GE2/1/2 23
# (MSR4000.) Display information about all IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip
Slot 0:
IP address VPN instance DS-Lite tunnel peer Detected on Duration(min)
192.168.31.2 -- -- GE2/1/2 1284
2.2.2.3 -- -- GE2/1/2 23
Slot 1:
IP address VPN instance DS-Lite tunnel peer Detected on Duration(min)
192.168.31.2 -- -- GE2/1/2 1284
2.2.2.3 -- -- GE2/1/2 23
# (MSR2000/MSR3000.) Display the number of IPv4 scanning attackers.
<Sysname> display attack-defense scan attacker ip count