R0106-HP MSR Router Series Security Command Reference(V7)

586
• scan detect
display attack-defense scan victim ip
Use display attack-defense scan victim ip to display information about IPv4 scanning attack victims.
Syntax
MSR2000/MSR3000:
display attack-defense scan victim ip [ interface interface-type interface-number | local ] [ count ]
MSR4000:
display attack-defense scan victim ip [ interface interface-type interface-number | local ] [ slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify a
global interface, such as a VLAN interface or tunnel interface. (MSR4000.)
count: Displays the number of matching IPv4 scanning attack victims.
Usage guidelines
If no parameter is specified, this command displays information about all IPv4 scanning attack victims.
Examples
# (MSR2000/MSR3000.) Display information about all IPv4 scanning attack victims.
<Sysname> display attack-defense scan victim ip
IP address VPN instance Detected on Duration(min)
192.168.31.2 -- GE2/1/4 21
2.2.2.3 -- GE2/1/4 1234
# (MSR4000.) Display information about all IPv4 scanning attack victims.
<Sysname> display attack-defense scan victim ip
Slot 0:
IP address VPN instance Detected on Duration(min)
192.168.31.2 -- GE2/1/4 21
2.2.2.3 -- GE2/1/4 1234
Slot 1:
IP address VPN instance Detected on Duration(min)
192.168.31.2 -- GE2/1/4 21
2.2.2.3 -- GE2/1/4 1234
# (MSR2000/MSR3000.) Display the number of IPv4 scanning attack victims.