R0106-HP MSR Router Series Security Command Reference(V7)

587
<Sysname> display attack-defense scan victim ip count
Totally 3 victim IP addresses.
# (MSR4000.) Display the number of IPv4 scanning attack victims.
<Sysname> display attack-defense scan victim ip count
Slot 0:
Totally 3 victim IP addresses.
Slot 1:
Totally 3 victim IP addresses.
Table 89 Command output
Field Descri
p
tion
Totally 3 victim IP addresses Total number of IPv4 scanning attack victims.
IP address IPv4 address of the victim.
VPN instance
MPLS L3VPN instance to which the victim IPv4 address belongs. If the victim
IPv4 address is on the public network, this field displays hyphens (--).
Detected on Where the attack is detected, on the device (Local) or an interface.
Duration(min) How long the attack lasts, in minutes.
Related commands
• display attack-defense scan attacker ip
• scan detect
display attack-defense scan victim ipv6
Use display attack-defense scan victim ipv6 to display information about IPv6 scanning attack victims.
Syntax
MSR2000/MSR3000:
display attack-defense scan victim ipv6 [ interface interface-type interface-number | local ] [ count ]
MSR4000:
display attack-defense scan victim ipv6 [ interface interface-type interface-number | local ] [ slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
local: Specifies the device.
slot slot-number: Specifies a card by its slot number. This option is available only when you specify a
global interface, such as a VLAN interface or tunnel interface. (MSR4000.)