R0106-HP MSR Router Series Security Command Reference(V7)

606
<Sysname> display client-verify http protected ipv6 count
Totally 3 protected IPv6 addresses.
# (MSR4000.) Display the number of protected IPv6 addresses for HTTP client verification.
<Sysname> display client-verify http protected ipv6 count
Slot 0:
Totally 3 protected IPv6 addresses.
Slot 1
Totally 3 protected IPv6 addresses.
Table 96 Command output
Field Descri
p
tion
Totally 3 protected IPv6
addresses
Total number of protected IPv6 addresses.
IPv6 address Protected IPv6 address.
VPN instance
MPLS L3VPN instance to which the protected IPv6 address belongs. If the
protected IPv6 address is on the public network, this field displays hyphens
(--).
Port
Port protected by TCP client verification. If TCP client verification protects all
ports, this field displays any.
Type Type of the protected IPv6 address, Manual or Dynamic.
Requested Number of packets destined for the protected IPv6 address.
Trusted Number of packets that passed the client verification.
Related commands
client-verify protected ipv6
display client-verify trusted ip
Use display client-verify trusted ip to display trusted IPv4 addresses for client verification.
Syntax
MSR2000/MSR3000:
display client-verify { dns | http | tcp } trusted ip [ ip-address [ vpn vpn-instance-name ] ] [ count ]
MSR4000:
display client-verify { dns | http | tcp } trusted ip [ ip-address [ vpn vpn-instance-name ] ] [ slot
slot-number ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
dns: Specifies the DNS client verification function.