R0106-HP MSR Router Series Security Command Reference(V7)

78
Usage guidelines
The data flow and packet measurement units for traffic statistics must be the same as configured on the
HWTACACS accounting servers. Otherwise, accounting results might be incorrect.
Examples
# In HWTACACS scheme hwt1, set the data flow and packet measurement units for traffic statistics to
kilobyte and kilo-packet, respectively.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] data-flow-format data kilo-byte packet kilo-packet
Related commands
display hwtacacs scheme
display hwtacacs scheme
Use display hwtacacs scheme to display the configuration or statistics of HWTACACS schemes.
Syntax
display hwtacacs scheme [ hwtacacs-scheme-name [ statistics ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
hwtacacs-scheme-name: Specifies an HWTACACS scheme by its name, a case-insensitive string of 1 to
32 characters. If you do not specify an HWTACACS scheme, this command displays the configuration of
all HWTACACS schemes.
statistics: Displays the HWTACACS service statistics. If you do not specify this keyword, the command
displays the configuration of the HWTACACS scheme.
Examples
# Displays the configuration of all HWTACACS schemes.
<Sysname> display hwtacacs scheme
Total 1 TACACS schemes
------------------------------------------------------------------
HWTACACS Scheme Name : hwtac
Index : 0
Primary Auth Server:
IP : 2.2.2.2 Port: 49 State: Active
VPN Instance: 2
Single-connection: Enabled
Primary Author Server:
IP : 2.2.2.2 Port: 49 State: Active
VPN Instance: 2