R0106-HP MSR Router Series Security Command Reference(V7)

81
• Zero or one public-network source IPv4 address.
• Zero or one public-network source IPv6 address.
• Private-network source IP addresses.
A newly specified public-network source IP address overwrites the previous one. Each VPN can have at
most one private-network source IPv4 address and one private-network source IPv6 address.
When you use both the nas-ip command and hwtacacs nas-ip command, the following guidelines
apply:
• The setting configured by using the nas-ip command in HWTACACS scheme view is only for the
HWTACACS scheme.
• The setting configured by using the hwtacacs nas-ip command in system view is for all HWTACACS
schemes.
• The setting in HWTACACS scheme view takes precedence over the setting in system view.
Examples
# Set the IP address for the device to use as the source address for HWTACACS packets to 129.10 .10 .1.
<Sysname> system-view
[Sysname] hwtacacs nas-ip 129.10.10.1
Related commands
nas-ip (HWTACACS scheme view)
hwtacacs scheme
Use hwtacacs scheme to create an HWTACACS scheme and enter HWTACACS scheme view.
Use undo hwtacacs scheme to delete an HWTACACS scheme.
Syntax
hwtacacs scheme hwtacacs-scheme-name
undo hwtacacs scheme hwtacacs-scheme-name
Default
No HWTACACS scheme exists.
Views
System view
Predefined user roles
network-admin
Parameters
hwtacacs-scheme-name: Specifies the HWTACACS scheme name, a case-insensitive string of 1 to 32
characters.
Usage guidelines
An HWTACACS scheme can be referenced by more than one ISP domain at the same time.
You can configure up to 16 HWTACACS schemes.
Examples
# Create an HWTACACS scheme named hwt1 and enter HWTACACS scheme view.