R0106-HP MSR Router Series Voice Command Reference(V7)

110
Default
No number substitution rule list is applied to a voice entity (the voice entity does not perform number
substitution).
Views
POTS entity view, VoIP entity view, voice interface view
Predefined user roles
network-admin
Parameters
called: Applies the number substitution rule to called numbers.
calling: Applies the number substitution rule to calling numbers.
list-number: Specifies a number substitution rule list by its number in the range of 1 to 2147483647.
Examples
# Apply number substitution rule list 6 to called numbers on POTS entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] substitute called 6
# Apply number substitution rule list 6 to called numbers on voice interface 2/1/1.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] subscriber-line2/1/1
[Sysname-voice-line2/1/1] substitute called 6
Related commands
• number-substitute
• rule
substitute (dial program view)
Use substitute to apply a number substitution rule list to the calling or called numbers of incoming or
outgoing calls.
Use undo substitute to remove the application.
Syntax
substitute { incoming-call | outgoing-call } { called | calling } list-number
undo substitute { incoming-call | outgoing-call } { called | calling } { list-number | all }
Default
No number substitution rule list is applied (no number substitution is performed).
Views
Dial program view