R0106-HP MSR Router Series Fundamentals Command Reference(V7)

249
• Deletes all license files (.ak files).
After this command is executed, only the items required for fundamental device operation are retained,
including the .bin files, the MAC addresses, and the electronic label information.
Examples
# Restore the factory-default configuration for the device.
<Sysname> restore factory-default
This command will restore the system to the factory default configuration and clear the
operation data. Continue [Y/N]:y
Restoring the factory default configuration. This process might take a few minutes. Please
wait.................................................................................
.........................Done.
Please reboot the system to place the factory default configuration into effect.
Related commands
reboot
scheduler job
Use scheduler job to create a job and enter job view. If the job already exists, you enter job view directly.
Use undo scheduler job to delete a job.
Syntax
scheduler job job-name
undo scheduler job job-name
Default
No job exists.
Views
System view
Predefined user roles
network-admin
Parameters
job-name: Specifies the job name, a case-sensitive string of 1 to 47 characters.
Usage guidelines
A job can be referenced by multiple schedules. In job view, you can assign commands to the job.
Examples
# Create a job named backupconfig and enter job view.
<Sysname> system-view
[Sysname] scheduler job backupconfig
[Sysname-job-backupconfig]
Related commands
• command
• scheduler schedule