R0106-HP MSR Router Series Fundamentals Command Reference(V7)

39
To display the shortcut key you have defined, use the display current-configuration | include
activation-key command.
Examples
# Configure character s as the shortcut key for starting a terminal session on the console line.
<Sysname> system-view
[Sysname] line console 0
[Sysname-line-console0] activation-key s
To verify the configuration:
1. Exit the console session.
[Sysname-line-console0] return
<Sysname> quit
2. Log in again through the console line.
The following message appears:
Press ENTER to get started.
3. Press Enter.
Pressing Enter does not start a session.
4. Enter s.
A terminal session is started.
<Sysname>
authentication-mode
Use authentication-mode to set the authentication mode for a user line.
Use undo authentication-mode to restore the default.
Syntax
In non-FIPS mode:
authentication-mode { none | password | scheme }
undo authentication-mode
In FIPS mode:
authentication-mode scheme
undo authentication-mode
Default
In non-FIPS mode, the authentication mode is password for VTY and AUX lines, and none for console
and TTY lines.
In non-FIPS mode, the authentication mode is none for the AUX line.
In FIPS mode, the authentication mode is scheme.
Views
User line view, user line class view
Predefined user roles
network-admin