R0106-HP MSR Router Series Fundamentals Command Reference(V7)

72
Predefined user roles
network-admin
Usage guidelines
The undo shell command is not supported in console line view or console line class view.
The undo shell command is not supported in AUX line view or AUX line class view.
You cannot disable the terminal service on the user line you are using.
When the device operates as a Telnet or SSH server, you cannot configure the undo shell command.
If the undo shell command is configured in user line class view, you cannot configure the shell command
in the view of a user line in the class.
Examples
# Disable the terminal service for user line VTY 0 through VTY 63 so no user can log in to the device
through the user lines.
<Sysname> system-view
[Sysname] line vty 0 63
[Sysname-line-vty0-63] undo shell
Disable ui-vty0-63 , are you sure? [Y/N]:y
[Sysname-line-vty0-63]
speed
Use speed to set the transmission rate (also called baud rate) on a user line.
Use undo speed to restore the default.
Syntax
speed speed-value
undo speed
Default
The transmission rate is 9600 bps.
Views
User line view
Predefined user roles
network-admin
Parameters
speed-value: Transmission rate in bps. Supported transmission rates vary by device model and
configuration environment. The transmission rates for asynchronous serial interfaces might include:
• 300 bps.
• 600 bps.
• 1200 bps.
• 2400 bps.
• 4800 bps.
• 9600 bps.