R0106-HP MSR Router Series Fundamentals Command Reference(V7)

78
undo telnet server dscp
Default
IPv4 uses the DSCP value 48 for outgoing Telnet packets on a Telnet server.
Views
System view
Predefined user roles
network-admin
Parameters
dscp-value: Specifies a DSCP value in the range of 0 to 63.
Usage guidelines
This command is not supported in FIPS mode.
The DSCP value is carried in the ToS field of an IP packet, and it indicates the transmission priority of the
packet.
Examples
# Set the DSCP value for IPv4 to use for outgoing Telnet packets to 30 on a Telnet server.
<Sysname> system-view
[Sysname] telnet server dscp 30
telnet server enable
Use telnet server enable to enable the Telnet server function.
Use undo telnet server enable to disable the Telnet server function.
Syntax
telnet server enable
undo telnet server enable
Default
The Telnet server function is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
This command is not supported in FIPS mode.
Administrators can Telnet to the device only when the Telnet server function is enabled.
Examples
# Enable the Telnet server function.
<Sysname> system-view
[Sysname] telnet server enable