R0106-HP MSR Router Series Fundamentals Command Reference(V7)

82
The following matrix shows the value ranges for the first-number2 and last-number2 arguments:
Hardware Value ran
g
e
MSR2000
aux: 0
tty: 1 to 80
vty: 0 to 63
MSR3000
aux: 0
tty: 1 to 176
vty: 0 to 63
MSR4000
aux: 0 to 2
console: 0 to 2
tty: 1 to 432
vty: 0 to 63
Usage guidelines
To configure settings for a single user line, use this command to enter the user line view.
To configure the same settings for multiple user lines, use this command to enter multiple user line views.
This command is an older version reserved for backward compatibility purposes. It has the same
functionality and output as the line command. HP recommends you use the line command.
Examples
# Enter the view of user line Console 0.
<Sysname> system-view
[Sysname] user-interface console 0
[Sysname-line-console0]
# Enter the views of user lines VTY 0 to VTY 63.
<Sysname> system-view
[Sysname] user-interface vty 0 63
[Sysname-line-vty0-63]
Related commands
user-interface class
user-interface class
Use user-interface class to enter user line class view.
Syntax
user-interface class { aux | console | tty | vty }
Views
System view
Predefined user roles
network-admin