HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

208
Syntax
ip netstream export v9-template refresh-rate packet packets
undo ip netstream export v9-template refresh-rate packet
Default
Version 9 templates are sent every 20 packets.
Views
System view
Predefined user roles
network-admin
Parameters
packets: Specifies the number of packets that are sent before version 9 templates are sent to the
NetStream server for an update. The value range is 1 to 600.
Usage guidelines
Version 9 is template-based and supports user-defined formats, so the NetStream-enabled device needs
to send the new template to the NetStream server for an update. If the version 9 format is changed on the
NetStream-enabled device and not updated on the NetStream server, the server is unable to associate
the received statistics with its proper fields. To avoid such situation, configure the refresh frequency for
version 9 templates so that the NetStream server can refresh them on time.
The refresh frequency and the refresh interval can both be configured, and the template is resent when
either of the conditions is reached.
Examples
# Configure the device to wait until 100 packets are sent before sending NetStream version 9 templates
again to the NetStream server.
<Sysname> system-view
[Sysname] ip netstream export v9-template refresh-rate packet 100
Related commands
ip netstream export v9-template refresh-rate time
ip netstream export v9-template refresh-rate time
Use ip netstream export v9-template refresh-rate time to configure the refresh interval for NetStream
version 9 templates so that the templates are sent after the specified time period.
Use undo ip netstream export version to restore the default.
Syntax
ip netstream export v9-template refresh-rate time minutes
undo ip netstream export v9-template refresh-rate time
Default
Version 9 templates are resent every 30 minutes.
Views
System view