HP MSR2000/3000/4000 Router Series Network Management and Monitoring Command Reference

211
Examples
# Reference ACL 2003 to enable NetStream filtering in the outbound direction of Ethernet 1/1.
<Sysname> system-view
[Sysname] interface ethernet 1/1
[Sysname-Ethernet1/1] ip netstream outbound
[Sysname-Ethernet1/1] ip netstream filter acl 2003 outbound
ip netstream max-entry
Use ip netstream max-entry max-entries to configure the maximum number of NetStream entries that the
cache can accommodate.
Use undo ip netstream max-entry to restore the default.
Syntax
ip netstream max-entry max-entries
undo ip netstream max-entry
Default
The cache can accommodate up to 10000 entries..
Views
System view
Predefined user roles
network-admin
Parameters
max-entries: Specifies maximum number of entries that the cache can accommodate. The value range for
this argument is 1000 to 100000.
Usage guidelines
The max-entries argument takes effect on each IRF member device. (MSR2000/MSR3000.)
The max-entries argument takes effect on each card. (MSR4000.)
Examples
# Set the maximum number of entries in the cache to 5000.
<Sysname> system-view
[Sysname] ip netstream max-entry 5000
ip netstream mpls
Use ip netstream mpls to collect and export statistics on MPLS packets. If you do not specify any keyword
or option, the top label and IP fields are also counted.
Use undo ip netstream mpls to restore the default.
Syntax
ip netstream mpls [ label-positions label-position1 [ label-position2 [ label-position3 ] ] ] [ no-ip-fields ]
undo ip netstream mpls