HP MSR Router Series Configuration Guides Index(V7)

specifying 802.1X supported domain
name delimiters, SEC-104
specifying MAC authentication domain,
SEC-122
specifying portal authentication domain,
SEC-313
super VLAN configuration, LSW-22
VLAN configuration, LSW-9
domain name
configuring for SIP UA, Voice-158
DNS mapping, IPSER-122
SIP routing, Voice-147
Domain Name System. SeeIPv6DNS
done message
MLD snooping, MCAST-404
DoS attack (URPF), SEC-472
dot1d-1998 (STP port path cost calculation),
LSW-62
Dot1q
VLAN termination Dot1q unambiguous
configuration, LSW-135, LSW-137
VLAN termination type, LSW-134
dot1s (STP port mode), LSW-66
dot1t (STP port path cost calculation),
LSW-62
down threshold (MPLS TE flooding),
MPLS-352
DPD
IKEv2 configuration, SEC-234
security IPsec IKE detector configuration,
SEC-219
DR
IP multicast IPv6 PIM-SM SPT switchover
configuration, MCAST-338
IP multicast PIM-SM SPT switchover
configuration, MCAST-73
IPv6 PIM-SM election, MCAST-312
IPv6 PIM-SSM election, MCAST-324
OSPF, IPR-62
OSPF DR election configuration, IPR-100
OSPF election, IPR-62
OSPFv3 DR election configuration,
IPR-324
OSPFv3 DR interface priority
configuration, IPR-315
PIM-SM election, MCAST-46
PIM-SM RPT building, MCAST-49
PIM-SSM election, MCAST-56
drop priority (QoS priority mapping),
QACL-28
dropping unknown IPv6 multicast data (MLD
snooping), MCAST-417
DSA
security SSH client host public key
configuration, SEC-368
security SSH DSA host key pair,
SEC-367
security SSH Stelnet client publickey
authentication, SEC-391
DSCP
configuring DSCP for outgoing LDP
packets (MPLS), MPLS-20
configuring DSCP for outgoing RSVP
packets (MPLS TE), MPLS-343
configuring port to trust packet priority,
QACL-30
configuring priority mapping table,
QACL-29
priority mapping table, QACL-28