HP MSR Router Series Configuration Guides Index(V7)

dynamic host configuration protocol. See
DHCP, See DHCP
dynamic mapping
configuration on IPv6 side, IPSER-152
dynamic mode
call flow, Voice-313
configuring, Voice-318
dynamic NAT
configuration, IPSER-125
dynamic port
IGMP snooping, MCAST-143
MLD snooping, MCAST-403
dynamic port (IGMP snooping), MCAST-149
dynamic route backup
features, WAN-162
how it works, WAN-162
dynamic signaling (configuring tunnel MPLS
TE), MPLS-335
E
E&M
analog voice subscriber line
configuration, Voice-27, Voice-54
cable type configuration, Voice-42
configuring analog E&M line failure
tone, Voice-45
configuring output gain of SLIC chip,
Voice-45
configuring receive and transmit
signaling, Voice-85
digital E&M signaling configuration,
Voice-83
digital E&M signaling start mode
configuration, Voice-83
E1 R2 signaling and digital E&M
signaling configuration, Voice-91
enabling E&M analog control signals
pass-through, Voice-44
enabling E&M non-signaling mode,
Voice-84
interface, Voice-29
non-signaling mode configuration,
Voice-44
signal tone, Voice-27
signal type configuration, Voice-42
start mode, Voice-30
start mode configuration, Voice-43
subscriber line, Voice-29
E&M start mode
delay start, Voice-30
immediate start, Voice-30
wink start, Voice-30
E1
binding FXS voice subscriber line to
POTS entity, Voice-70
configuring basic function for voice
subscriber line, Voice-67
configuring basic parameter for E1
voice interface, Voice-62
configuring basic R2 signaling
parameter, Voice-76
configuring connection mode for R2 call,
Voice-78
configuring DTMF detection sensitivity,
Voice-67
configuring echo adjustment function,
Voice-69
configuring framing format and line
coding format, Voice-63
configuring R2 country or region mode,
Voice-76