HP MSR Router Series Configuration Guides Index(V7)

RIPv2 automatic route summarization
enable, IPR-25
scanning (ARP attack protection),
SEC-422
voice VLAN assignment mode, LSW-28
voice VLAN automatic assignment
mode port operation configuration,
LSW-31, LSW-33
automatic bandwidth adjustment (MPLS TE),
MPLS-325
automatic route advertisement
traffic forwarding along tunnel (MPLS
TE), MPLS-350
automatic route advertisement (MPLS TE),
MPLS-325
automatic rule numbering (ACL), QACL-3
autonegotiation
Ethernet interface duplex mode, IF-2
autonomous system boundary router. See
ASBR
auto-RP
BIDIR-PIM, MCAST-77
configuring PIM-SM auto-RP, MCAST-65
AUX interface
displaying, IF-20
maintaining, IF-20
WAN configuration, IF-19
AVF
high availability IPv4 VRRP operating
mode specification, HA-67
B
backbone, IPR-58
enabling OSPF RFC 1583 compatibility,
IPR-82
OSPF backbone router, IPR-60
backing up
MPLS TE CRLSP backup, MPLS-391
next-startup configuration file, FM-113
WAN DCC circular dial string
backup+Internet access, WAN-186
WAN DCC dynamic route backup,
WAN-162, WAN-191, WAN-193,
WAN-195, WAN-198
WAN DCC dynamic route backup
group, WAN-163
WAN DCC dynamic route backup
interface, WAN-164
WAN DCC dynamic route backup
warm-up timer, WAN-164
backing up entries (DHCP snooping),
IPSER-69
backup
automatic configuration backup after
software upgrade, FM-110
configuring CR-LSP (MPLS TE),
MPLS-355
configuring IPsec interface backup,
SEC-196
configuring primary and backup static
VCs on a Layer 3 interface (MPLS
L2VPN), MPLS-59
CR-LSP (MPLS TE), MPLS-326
enabling IPsec module backup, SEC-176
route backup), IPR-3
backup mode
homing, Voice-146
parking, Voice-146
backup port (MST), LSW-49
bandwidth
Ethernet link aggregate interface
(expected bandwidth), LSW-94