HP MSR Router Series Configuration Guides Index(V7)

patch file location
configuration, FM-148
patch state
ACTIVE state, FM-145
DEACTIVE state, FM-145
IDLE state, FM-144
RUNNING state, FM-146
path
BGP path attributes, IPR-173
calculating (MPLS TE), MPLS-318
configuring BGP selection, IPR-243
configuring explicit path (MPLS TE),
MPLS-338
controlling BGP path selection, IPR-199
establishing (MPLS TE), MPLS-319
overhead. See see POH
vector (LDP MPLS), MPLS-17
WAN frame relay virtual circuit,
WAN-93
path (IP multicast), MCAST-130
pausing between CLI output screens, FM-10
PBR
apply clause, IPR-269
configuration, IPR-269, IPR-271, IPR-273,
IPR-274
configuration (interface/packet
length-based), IPR-277
configuration (interface/packet
type-based), IPR-275
configuration (local/packet type-based),
IPR-274
configuration (local/specifying output
interface and next hop), IPR-280
displaying, IPR-274
if-match clause, IPR-269
if-match clause relationship, IPR-270
interface PBR configuration, IPR-273
local PBR configuration, IPR-273
maintaining, IPR-274
node action configuration, IPR-272
node creation, IPR-271
node match criteria configuration,
IPR-272
policy, IPR-269
policy configuration, IPR-271
Track collaboration, IPR-271
PBX
call watch, Voice-263, Voice-264
SIP trunk, Voice-202
PD
maximum PoE interface power, NM-164
PoE monitoring configure, NM-166
PDU
IS-IS CLV format, IPR-127
IS-IS LSP packet format, IPR-124
IS-IS PDU hello packet format, IPR-123
IS-IS SNP format, IPR-126
IS-IS types, IPR-122
PE
BGP 6PE basic configuration, IPR-374
BGP 6PE configuration, IPR-373
BGP 6PE optional capabilities
configuration, IPR-375
CE and PE routing information
exchange (IPv6 MPLS L3VPN),
MPLS-252
configuring inter-AS IPv6 VPN ASBR PE
option C (IPv6 MPLS L3VPN), MPLS-265