HP MSR Router Series Configuration Guides Index(V7)

configuration, NM-160, NM-170
detect nonstandard PDs enable,
NM-163
displaying, NM-169
enabling, NM-162
interface power management configure,
NM-165
maximum PoE interface power
configure, NM-164
monitoring configure, NM-166
PD, NM-160
PI, NM-160
PoE interface configure, NM-167
PoE profile apply, NM-168
PoE profile configuration, NM-167
PSE, NM-160
PSE processing software upgrading,
NM-168
PoE profile
PoE interface configuration, NM-167
PoE profile apply failure
PoE troubleshooting, NM-171
POH
CPOS interface overhead byte, IF-91
point-to-multipoint. See P2MP
point-to-point. See P2P
point-to-point IS-IS network type, IPR-121
Point-to-Point Protocol. Use PPP
Point-to-Point Protocol over Ethernet. Use
PPPoE
poison reverse
enabling RIP, IPR-30
RIP, IPR-29
RIPng configuration, IPR-293, IPR-294
policing
traffic (QoS), QACL-34, QACL-37,
QACL-41
policy
ACFP collaboration policy, OAA-6
ACFP collaboration policy information,
OAA-5
applying attack protection policy
configuration to interface, SEC-442
applying DDNS policy to interface,
IPSER-92
applying QoS, QACL-25
applying QoS policy (traffic mirroring),
N M-181
applying QoS to online user, QACL-26
attack protection policy configuration,
SEC-438
binding policy, policy group, profile to
encryption card, SEC-175
configuring BGP route distribution
filtering policy, IPR-194, IPR-195
configuring BGP route reception
filtering policy, IPR-194, IPR-196
configuring inter-AS IPv6 VPN ASBR PE
routing option C (IPv6 MPLS L3VPN),
MPLS-265
configuring inter-AS VPN ASBR PE
routing policy (MPLS L3VPN), MPLS-138
configuring IP multicast routing policy,
MCAST-127
configuring LSP triggering (MPLS),
MPLS-16
configuring PBR node action, IPR-272
configuring PBR node match criteria,
IPR-272
configuring PBR policy, IPR-271