HP MSR Router Series Configuration Guides Index(V7)

binding logical voice subscriber line to
POTS entity, Voice-70
CNG fax switchover configuration
(FoIP), Voice-273
configuring basic function for POTS
voice entity, Voice-10
configuring basic function for VoIP voice
entity, Voice-16
configuring global default parameter,
Voice-21
configuring local POTS voice entity to
play ringback tone, Voice-11
configuring options related to dial plan,
Voice-13
configuring timeout interval for RTP
stream, Voice-19
configuring voice call
performance-related parameter,
Voice-20
creating voice entity, Voice-9
creating VoIP voice entity, Voice-15
DTMF transmission configuration for
POTS, Voice-12
DTMF transmission configuration for
VoIP, Voice-16
ECM for fax configuration (FoIP),
Voice-274
enabling FXO monitoring, Voice-22
enabling local call identification,
Voice-19
enabling trap function, Voice-23
enabling VAD, Voice-13
fax faculty transmission mode
configuration (FoIP), Voice-274
fax interworking protocol configuration
(FoIP), Voice-271
FoIP configuration, Voice-270,
Voice-280
FoIP fax training mode configuration,
Voice-276
FoIP global default parameter
configuration, Voice-278
FoIP maximum fax rate configuration,
Voice-275
gateway carrier transmit energy level
configuration (FoIP), Voice-277
jitter buffer configuration, Voice-14
local training threshold configuration
(FoIP), Voice-277
SIP modem pass-through configuration
(FoIP), Voice-282
voice entity configuration, Voice-8,
Voice-9, Voice-25
VoIP, Voice-1
VoIP voice entity configuration, Voice-15,
Voice-25
power
WLAN QoS WMM U-APSD
power-save mechanism, WLAN-65
power over Ethernet. Use PoE
power supply priority
PoE interface power management,
NM-165
PoE profile configuration, NM-167
power-up self-test
cryptographic engine, SEC-478
software cryptographic algorithm,
SEC-478
PPP
authentication configuration, WAN-7
authentication methods, WAN-5