HP MSR Router Series Configuration Guides Index(V7)

traffic statistics function, SEC-436
WAN PPPoE DDR session configuration,
WAN-53
Session Initiation Protocol. Use SIP
session management
SIP, Voice-133
session refresh
BYE message, Voice-163
INVITE message, Voice-163
SIP, Voice-163
UPDATE message, Voice-163
session setup
SIP, Voice-133
setting
802.1p precedence for IGMP messages
globally, MCAST-161
802.1p precedence for IGMP messages
in VLAN, MCAST-162
802.1p precedence for MLD messages
globally, MCAST-421
802.1p precedence for MLD messages
in VLAN, MCAST-421
802.1X authentication timeout timers,
SEC-97
802.1X port authorization state, SEC-95
called number to be checked during an
incoming call, WAN-72
CLP bit for ATM cells, WAN-214
command history buffer size, FM-9
configuration environment, FM-56
delay waiting for response to Invite
Clear message, WAN-361
DLSw timer, WAN-246
electrical impedance, Voice-35
file system operation modes, FM-123
hello interval, WAN-292
IGMP snooping 802.1p message
precedence, MCAST-161
IGMP snooping dynamic port aging
timer, MCAST-149
IGMP snooping dynamic port aging
timer globally, MCAST-149
IGMP snooping dynamic port aging
timer in VLAN, MCAST-149
IP traffic ordering interval, NM-150
IPv6 multicast MLD snooping dynamic
port aging timers, MCAST-408
IPv6 multicast MLD snooping dynamic
port aging timers globally, MCAST-409
IPv6 multicast MLD snooping dynamic
port aging timers in VLAN, MCAST-409
IPv6 multicast MLD snooping max
number groups on port, MCAST-419
keepalive interval, Voice-18
keepalive timers, SEC-219
Layer 2 Ethernet interface MDI mode,
IF-12
Layer 3 Ethernet interface MTU, IF-13
Layer 3 Ethernet subinterface MTU, IF-13
LLDP operating mode, LSW-120
LLDP parameters, LSW-123
LLDP re-initialization delay, LSW-121
LLDPDU encapsulation format, LSW-124
max number 802.1X authentication
request attempts, SEC-97
max number 802.1X concurrent users
on port, SEC-96
max number of online portal users,
SEC-313