HP MSR Router Series Configuration Guides Index(V7)

trap (DHCP message), IPSER-40
trap buffer output (system information),
NM-194
trapping
configuring agent sending to host
(SNMP), NM-7
configuring information center, NM-185
configuring SNMP function, NM-6
default output rules (system information),
NM-187
enabling BGP trap, IPR-220
enabling IS-IS SNMP trap, IPR-149
enabling SNMP function, NM-6
Level-3 (OSPF fault trap), IPR-83
Level-4 (OSPF alarm trap), IPR-83
Level-5 (OSPF normal trap), IPR-83
Level-6 (OSPF notification trap), IPR-83
LLDP configuration, LSW-126
port security trap enable, SEC-139
trapping (enabling MPLS), MPLS-28
tributary
CPOS interface tributary unit (TU), IF-89
CPOS interface tributary unit group
(TUG), IF-89
triggering
configuring authentication trigger
function, SEC-99
configuring LSP policy (MPLS), MPLS-16
OSPF GR, IPR-86
self-test, SEC-479
TRIP
configuration, IPR-32
enable, IPR-33
how it works, IPR-21
message type, IPR-21
retransmission mechanism, IPR-21
retransmission parameter configuration,
IPR-33
RIP extention, IPR-20
WAN, IPR-20
trivial file transfer protocol. SeeTFTP
troubleshooting
abnormal termination of IPv6 multicast
data, MCAST-400
ACL configuration error, SEC-230
ATM, WAN-233
ATM IMA-E1/T1 interface, IF-70
ATM interface, IF-80
BGP, IPR-251
BGP peer relationship not established,
IPR-251
cannot change port security mode
when user online, SEC-154
configured tunnel interface cannot go
up, IPSER-243
configuring information center, NM-185
connection limit, SEC-455
CPOS interface, IF-97
CPOS interface loopback detected,
IF-97
DHCP relay agent configuration,
IPSER-59
DHCP server configuration, IPSER-45
digital voice subscriber line, Voice-98
DSL interface, IF-80
EAD fast deployment, SEC-117
failed to establish an IPsec tunnel,
SEC-229