HP MSR2000/3000/4000 Router Series ACL and QoS Command Reference

15
Views
System view
Predefined user roles
network-admin
Usage guidelines
The packet filter applies the default action to all ACL applications for packet filtering. The default action
appears in the display command output for packet filtering.
Examples
# Set the packet filter default action to deny.
<Sysname> system-view
[Sysname] packet-filter default deny
Related commands
• display packet-filter
• display packet-filter statistics
• display packet-filter verbose
reset acl counter
Use reset acl counter to clear statistics for ACLs.
Syntax
reset acl counter [ ipv6 ] { acl-number | all | name acl-name }
Views
User view
Predefined user roles
network-admin
Parameters
acl-number: Specifies an ACL by its number:
• 2000 to 2999 for IPv4 basic ACLs if the ipv6 keyword is not specified and for IPv6 basic ACLs if
the ipv6 keyword is specified.
• 3000 to 3999 for IPv4 advanced ACLs s if the ipv6 keyword is not specified and for IPv6 advanced
ACLs if the ipv6 keyword is specified.
• 4000 to 4999 for Ethernet frame header ACLs. This entry is not displayed if the ipv6 keyword is
specified.
• 5000 to 5999 for user-defined ACLs. This entry is not displayed if the ipv6 keyword is specified.
all: Clears statistics for all IPv4 basic, IPv4 advanced, Ethernet frame header, and user-defined ACLs if
you do not specify the ipv6 keyword, or clears statistics for all IPv6 basic and IPv6 advanced ACLs if you
specify the ipv6 keyword.
name acl-name: Clears statistics of an ACL specified by its name. The acl-name argument is a
case-insensitive string of 1 to 63 characters. It must start with an English letter. For a basic ACL or
advanced ACL, if you do not specify the ipv6 keyword, this option specifies the name of an IPv4 basic