4000 Router Series ACL and QoS Command Reference

ACL or advanced ACL. If you specify the ipv6 keyword, this option specifies the name of an IPv6 basic

ACL or advanced ACL.

Examples

# Clear statistics for IPv4 basic ACL 2001.

<Sysname> reset acl counter 2001

Related commands

display acl

reset packet-filter statistics

Use reset packet-filter statistics to clear the match statistics (including the accumulated statistics) and the

default action statistics of ACLs for packet filtering.

Syntax

reset packet-filter statistics interface [ interface-type interface-number ] { inbound | outbound } [ default

| [ ipv6 ] { acl-number | name acl-name } ]

Views

User view

Predefined user roles

network-admin

Parameters

interface [ interface-type interface-number ]: Specifies an interface by its type and number. If no interface

is specified, the command clears packet filtering ACL statistics on all interfaces.

inbound: Specifies the inbound direction.

outbound: Specifies the outbound direction.

default: Clears the default action statistics of ACLs for packet filtering.

acl-number: Specifies an ACL by its number:

• 2000 to 2999 for IPv4 basic ACLs if the ipv6 keyword is not specified and for IPv6 basic ACLs if

the ipv6 keyword is specified.

• 3000 to 3999 for IPv4 advanced ACLs s if the ipv6 keyword is not specified and for IPv6 advanced

ACLs if the ipv6 keyword is specified.

• 4000 to 4999 for Ethernet frame header ACLs. This entry is not displayed if the ipv6 keyword is

specified.

• 5000 to 5999 for user-defined ACLs. This entry is not displayed if the ipv6 keyword is specified.

name acl-name: Specifies an ACL by its name. The acl-name argument is a case-insensitive string of 1 to

63 characters. It must start with an English letter. For a basic ACL or advanced ACL, if you do not specify

the ipv6 keyword, this option specifies the name of an IPv4 basic ACL or advanced ACL. If you specify

the ipv6 keyword, this option specifies the name of an IPv6 basic ACL or advanced ACL.

Usage guidelines

When none of default, acl-number, and name acl-name is specified, this command clears the match

statistics and default action statistics of all ACLs for packet filtering.