HP MSR2000/3000/4000 Router Series ACL and QoS Command Reference

38
Table 15 Available match criteria
O
p
tion Descri
p
tion
acl [ ipv6 ] { acl-number | name
acl-name }
Matches an ACL.
The acl-number argument ranges from 2000 to 5999 for an IPv4 ACL, and
2000 to 3999 for an IPv6 ACL.
The acl-name argument is a case-insensitive string of 1 to 63 characters,
which must start with an English letter, and to avoid confusion, it cannot be
all.
app-group group-name
Matches an application group.
The group-name argument specifies a system-defined application group by
its name. The value range for this argument is 1 to 63.
application app-name
Matches an application.
The app-name argument specifies a system-defined application by its name.
The value range for this argument is 1 to 63.
any Matches all packets.
classifier classifier-name
Matches a class.
The classifier-name argument specifies a class by its name.
customer-dot1p
dot1p-value&<1-8>
Matches the 802.1p priority of the customer network.
The dot1p-value&<1-8> argument is a list of 802.1p priority values. An
802.1p priority ranges from 0 to 7. &<1-8> indicates that you can enter up
to eight 802.1p priority values.
customer-vlan-id vlan-id-list
Matches the customer VLAN IDs (CVLANs).
The vlan-id-list argument is in the format of vlan-id-list = { vlan-id | vlan-id1 to
vlan-id2 }&<1-10>, where the vlan-id, vlan-id1, and vlan-id2 arguments
represent the VLAN IDs and each range from 1 to 4094, vlan-id1 must be no
greater than vlan-id2, and &<1-10> indicates that you can specify up to 10
VLAN IDs or VLAN ID ranges.
destination-mac mac-address Matches a destination MAC address.
dscp dscp-value&<1-8>
Matches DSCP values.
The dscp-value&<1-8> argument is a list of DSCP values. A DSCP value
ranges from 0 to 63 or can be a keyword shown Table 17. &<1-8> indicates
that you can enter up to eight DSCP values.
inbound-interface
interface-type interface-number
Matches an incoming interface specified by its type and number.
ip-precedence
ip-precedence-value&<1-8>
Matches IP precedence.
The ip-precedence-value&<1-8> argument is a list of IP precedence values.
An IP precedence ranges from 0 to 7. &<1-8> indicates that you can enter
up to eight IP precedence values.
local-precedence
local-precedence-value&<1-8>
Matches local precedence.
The local-precedence-value&<1-8> argument is a list of local precedence
values. A local precedence ranges from 0 to 7. &<1-8> indicates that you
can enter up to eight local precedence values.
mpls-exp exp-value&<1-8>
Matches MPLS EXP values.
The exp-value&<1-8> argument is a list of EXP values. An EXP value ranges
from 0 to 7. &<1-8> indicates that you can enter up to eight EXP values.