HP MSR2000/3000/4000 Router Series ACL and QoS Command Reference

76
Queue Length: 100 (Packets)
Queue Size : 98 (Packets)
Passed : 2013671 (Packets) 249695204 (Bytes)
Discarded: 13214444 (Packets) 1638591056 (Bytes)
Delayed : 1921029 (Packets) 238207596 (Bytes)
Table 23 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Rule(s) Match criteria.
CIR CIR in kbps.
CBS CBS in bytes, which specifies the depth of the token bucket for holding bursty traffic.
EBS EBS in bytes, which specifies the traffic exceeding CBS when two token buckets are used.
Queue Length Number of packets that the buffer can hold.
Queue Size Number of packets in the buffer.
Passed Number and bytes of the packets that have passed.
Discarded Number and bytes of dropped packets.
Delayed Number and bytes of delayed packets.
qos gts
Use qos gts to set GTS parameters for traffic of a specific traffic class or all the traffic on the interface.
Use qos gts acl to set GTS parameters for the traffic matching the specific ACL. Using the command
multiple times with different ACLs sets GTS parameters for different traffic flows.
Use qos gts any to set GTS parameters for all the traffic on the interface.
Use undo qos gts to remove GTS parameters for traffic a specific traffic class or all the traffic on the
interface.
Syntax
qos gts { any | acl [ ipv6 ] acl-number } cir committed-information-rate [ cbs committed-burst-size [ ebs
excess-burst-size ] ] [ queue-length queue-length ]
undo qos gts { any | acl [ ipv6 ] acl-number }
Default
No GTS parameters are configured on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
any: Shapes all packets.