HP MSR2000/3000/4000 Router Series ACL and QoS Configuration Guide

10
Setting the interval for generating and outputting packet
filtering logs
After you set the interval, the device periodically generates and outputs the packet filtering logs to the
information center, including the number of matching packets and the matched ACL rules. For more
information about information center, see Network Management and Monitoring Configuration Guide.
To set the interval for generating and outputting packet filtering logs:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the interval for generating
and outputting packet filtering
logs.
acl [ ipv6 ] logging interval interval
The default setting is 0 minutes,
which mean that no packet filtering
logs are generated.
Setting the packet filtering default action
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the packet filtering default
action to deny.
packet-filter default deny
By default, the packet filter permits
packets that do not match any ACL
rule to pass.
Displaying and maintaining ACLs
Execute display commands in any view and reset commands in user view.
Task Command
Display ACL configuration and match statistics.
display acl [ ipv6 ] { acl-number | all | name
acl-name }
Display whether an ACL has been successfully applied
to an interface for packet filtering
(MSR2000/MSR3000).
display packet-filter interface [ interface-type
interface-number ] [ inbound | outbound ]
Display whether an ACL has been successfully applied
to an interface for packet filtering (MSR4000).
display packet-filter { interface [ interface-type
interface-number ] [ inbound | outbound ] | interface
vlan-interface vlan-interface-number } [ inbound |
outbound ] [ slot slot-number ] }
Display match statistics and default action statistics for
packet filtering ACLs.
display packet-filter statistics interface interface-type
interface-number { inbound | outbound } [ default |
[ ipv6 ] { acl-number | name acl-name } ] [ brief ]
Display the accumulated statistics for packet filtering
ACLs.
display packet-filter statistics sum { inbound |
outbound } [ ipv6 ] { acl-number | name acl-name }
[ brief ]