HP MSR2000/3000/4000 Router Series ACL and QoS Configuration Guide

29
• The R&D department connects to Ethernet 1/2 of the router, which sets the 802.1p priority of traffic
from the R&D department to 4.
• The management department connects to Ethernet 3/1 of the router, which sets the 802.1p priority
of traffic from the management department to 5.
Configure port priority, 802.1p-to-local mapping table, and priority marking to implement the plan as
described in Table 2.
Table 2 Configuration plan
Traffic
destination
Traffic priority
order
Queuin
g
p
lan
Traffic source Out
p
ut
q
ueue Queue
p
riorit
y
Public servers
R&D department >
management
department > marketing
department
R&D department 6 High
Management
department
4 Medium
Marketing department 2 Low
Internet
Management
department > marketing
department > R&D
department
R&D department 2 Low
Management
department
6 High
Marketing department 3 Medium
Figure 6 Network diagram
Host
Server
R&D Dept
Internet
Router
Eth1/1
Eth1/2Eth1/3
Eth1/4
Marketing Dept
Host
Server
Host
Server
Management Dept
Public servers
Eth1/5
Data server
Mail server