HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

104
To save the downloaded file to the working directory accessed by the ftp command, the localfile
argument must specify a file name such as a.cfg. If you do not provide the localfile argument, the
downloaded file uses its original name.
To save the downloaded file to some other directory, the localfile argument must specify the target
directory plus the file name such as cfa0:/subdirectory/a.cfg. Otherwise, the command fails to take
effect.
Examples
# Download file a.txt and save it as b.txt in the working directory accessed by the ftp command.
ftp> get a.txt b.txt
local: b.txt remote: a.txt
150 Connecting to port 47457
226 File successfully transferred
1569 bytes received in 0.00527 seconds (290.6 kbyte/s)
# Download file a.txt to the folder test from the working directory accessed by the ftp command.
ftp> get a.txt cfa0:/test/b.txt
local: cfa0:/test/b.txt remote: a.txt
150 Connecting to port 47457
226 File successfully transferred
1569 bytes received in 0.00527 seconds (290.6 kbyte/s)
# On an MSR4000, download file a.txt to the CF card root directory of the standby MPU (in slot 1) and
save it as c.txt.
ftp> get a.txt slot1#cfa0:/c.txt
local: slot1#cfa0:/c.txt remote: a.txt
150 Connecting to port 47460
226 File successfully transferred
1569 bytes received in 0.0564 seconds (27.2 kbyte/s)
Related commands
put
help
Use help to display all commands supported by an FTP client.
Use help command-name to display the help information of a specific command.
Syntax
help [ command-name ]
Views
FTP client view
Predefined user roles
network-admin
Parameters
command-name: Specifies a command supported by the FTP client.