HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

131
# Return to the upper directory.
<Sysname> cd ..
# On an MSR4000, change to the test folder in the root directory of the active MPU.
1. Display the number of the slot where the standby MPU resides.
<Sysname> display device
Slot No. Board Type Status Primary SubSlots
-----------------------------------------------------------------------------
0 MPU-100 Normal Master 0
1 MPU-100 Normal Standby 0
2 SPU-300 Normal N/A 10
The output shows that the slot number of the standby MPU is 1.
2. Access the root directory of the CF card on the standby MPU.
<Sysname> cd slot1#cfa0:/
3. Change to the test folder in the root directory of the active MPU.
<Sysname> cd cfa0:/test
copy
Use copy to copy a file.
Syntax
In non-FIPS mode:
copy fileurl-source fileurl-dest [ vpn-instance vpn-instance-name ] [ source interface interface-type
interface-number ]
In FIPS mode:
copy fileurl-source fileurl-dest
Views
User view
Predefined user roles
network-admin
Parameters
fileurl-source: Specifies the name or URL of the file to be copied. If the file resides on an FTP or TFTP server
rather than on the device, specify the URL of the file. Whether a URL is case sensitive depends on the
server. In FIPS mode, you cannot specify a URL.
fileurl-dest: Specifies the name or URL of the destination file or directory. To copy the source file to an FTP
or TFTP server, specify a URL. If you specify a directory, the device copies the specified file to the directory
and saves it with its original file name. Whether a URL is case sensitive depends on the server. In FIPS
mode, you cannot specify a URL.
vpn-instance vpn-instance-name: Specifies the VPN instance to which the destination FTP or TFTP server
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the server
belongs to the public network, do not specify this option.
source interface interface-type interface-number: Specifies the source interface used to connect to the
server. After you specify the source interface, the device uses the primary IP address of the source