HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

161
Please wait ...........
Configuration file is cleared.
# On MSR4000, delete the main next-startup configuration file.
<Sysname> reset saved-configuration
The saved configuration file will be erased. Are you sure? [Y/N]:y
Configuration file in cfa0 is being cleared.
Please wait ...
..
MainBoard:
Configuration file is cleared.
Slot 1:
Erase next configuration file successfully
Related commands
display saved-configuration
restore startup-configuration
Use restore startup-configuration to download a configuration file from a TFTP server and specify it as
the main next-startup configuration file.
Syntax
restore startup-configuration from tftp-server src-filename
Views
User view
Predefined user roles
network-admin
Parameters
tftp-server: Specifies a TFTP server's IPv4 address or host name. The host name is a case-insensitive string
of 1 to 253 characters. Valid characters include letters, digits, hyphens (-), underscores (_), and dots (.).
src-filename: Specifies the file name of the configuration file to be downloaded.
Usage guidelines
This command is not supported in FIPS mode.
Before restoring the configuration file for the next startup, make sure the server is reachable, the server is
enabled with TFTP service, and you have read and write permissions.
This command provides an easy method for configuration file restoration by automatically performing all
operations required for restoring the main next-startup configuration file.
On an MSR4000, this command downloads the configuration file to the root directory of the storage
medium on each MPU and specifies the file as the main next-startup configuration file.
Examples
# On an MSR2000 or MSR3000, download the configuration file test.cfg from the TFTP server at
2.2.2.2 and specify the file as the main next-startup configuration file.
<Sysname> restore startup-configuration from 2.2.2.2 test.cfg
Restoring the next startup-configuration file from 2.2.2.2. Please wait...finished.