HP MSR2000/3000/4000 Router Series Fundamentals Command Reference

168
cfa0:/ssh.bin already exists on the device.
Overwrite it? [Y/N]:y
The specified file list will be used as the backup startup software images at the next
reboot on the device.
# On an MSR4000, specify cfa0:/all.ipe as the backup startup image file for the MPU in slot 0.
<Sysname> boot-loader file cfa0:/all.ipe slot 0 backup
Images in IPE:
boot.bin
system.bin
ssh.bin
This command will set the backup startup software images. Continue? [Y/N]:Y
Add images to target slot.
cfa0:/boot.bin already exists on slot 0.
cfa0:/system.bin already exists on slot 0.
cfa0:/ssh.bin already exists on slot 0.
Overwrite it? [Y/N]:y
The specified file list will be used as the backup startup software images at the next
reboot on slot 0.
Related commands
display boot-loader
boot-loader update
Use boot-loader update to synchronize startup images from the active MPU to the standby MPU.
Syntax
boot-loader update slot slot-number
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies the slot number of the standby MPU.
Usage guidelines
The following matrix shows the command and chassis compatibility:
Command MSR2000 MSR3000 MSR4000
boot-loader update No No Yes
You can use this command to synchronize startup images after adding a new MPU.
If any of the startup software images require a license, register and activate a license for the image on
the new MPU before executing this command. Use the display license feature command to verify the
licensing state of software images.